Metcalfe Bench 10lb Potato Peelers in Aluminium
The Metcalfe 10Ib (4.5Kg) and 15Ib (6.8Kg) potato peeling machines are constructed from food grade, non-corrosive aluminium alloy castings, with the sindle housing and chute integrally, eliminating joints and possible leakage.
Available in grey hammer paint finish of in natural aluminium. These peelers can be sinktop, pedestal or trolley mounted. The peelers comply with all relevant safety standards, and are designed for ease of maintenance and cleaning.
* No lubrication required
* Rotor Plate Coated on both sides, doubling the life of the rotor plate. One side is coated with fine grained abrasive for new potatoes, the other side coated with course grain for old potatoes.
* Peeling Chamber. The inside wall of the peeling chamber has cast in abrasive serrations which dispense with the need for abrasive coating. It has beenbeen proved that there is considerably less loss of potato both during peeling and boiling when peeled in this type of machine.
* Cleaning Top casting is removable without tools, so that the rotor plate can be lifted out. Turn on water and the complete machine is flushed clean.
* Finish. The machines are finished in a high gloss hard enamelled grey hammer or natural aluminium. The top casting is a highly polished stain resisting aluminium alloy casting, preventing chipped paintwork when filling.
One year parts & labour warranty.
Installation kit (see options) includes 3ft water inlet hose, tap connector, length of waste pipe, elbow, coupling and sink skip.
Height of peeling chamber: (mm)
Discharge Outlet: (mm)
|Estimated Delivery||3 to 5 Working Days|
|Supplier Product Code||5P103|