Metcalfe WD-50F Food Waste Disposer
Metcalfe heavy duty food waste disposer units are designed to cope quickly, efficiently, hygienically and safely with all types of food waste, including small bones, skin, preparation and table waste, which are all ground into fine particles and washed away into the drainage system, thus eliminating unhygienic scrap bins and costly refuse collection.
Suitable to deal with food waste from small and large canteens, restaurants, schools, clubs, ships, oil rigs etc.
The nominal capacity is up to 150kg per hour.
All Units are fitted with the same type of motor - ½h.p. high torque continuously rated reversing motor which is fan cooled with capacitor start and incorporating thermal cut-out. The units have precision cutting head and the rubber housing is particularly efficient at absorbing vibration and
reducing noise levels. All types supplied complete with ‘S’ trap for connection to 2” waste pipe. The outlet is fully adjustable through 360° to suit any particular installation.
EXCLUSIVE to this range is the electrical control equipment - it reduces the input voltage 240v to 12v and ensures greater safety in the possible
event of an electrical fault. A PRINTED CIRCUIT incorporates a no-volt release device.
Operation is fully automatic. Immediately the unit is switched on the solenoid valve fitted to the water supply is actuated. The flow rate consumption is approximately 12 to 16 litre/minute.
The freestanding unit is fabricated in stainless steel and incorporates the 12 volt motor controls in a sealed unit mounted on the front panel. Stainless steel side panels are available as an optional extra. Like the tabling model the unit incorporates a lockable hopper lid which is fully
interlocked electrically, preventing hand access to the grinding head whilst the machine is running.
12 months Parts & Labour Warranty
Important Note: The illustration of the freestanding unit is shown with the optional side panels avaliable at an extra cost.
WD-50F Food Waste Disposer
WATER SUPPLY Model WD-50S - From sink tap (not supplied)
WASTE 54mm plastic or copper pipe to be connected to ‘S’ trap supplied with units, laid to a minimum
|Estimated Delivery||3 to 5 Working Days|
|Supplier Product Code||WD-50F|