Shopping Cart

0 item £0.00

My Cart -

0 item
Categories

Metcalfe WD-50S Food Waste Disposer


Brand: Metcalfe

SKU Code: MET-WD-50S

Estimated Delivery: 3 to 5 Working Days

Warranty: N/A

Lease this item from as little as £ 10.88 per week. < For more info > Subject to credit approval. E&OE
Excl. VAT: £1,275.00 Incl. VAT: £1,530.00 £1,800.00

Availability: In stock

* Required Fields

Excl. VAT: £1,275.00 Incl. VAT: £1,530.00 £1,800.00
Qty:

Metcalfe WD-50S Food Waste Disposer

Metcalfe heavy duty food waste disposer units are designed to cope quickly, efficiently, hygienically and safely with all types of food waste, including small bones, skin, preparation and table waste, which are all ground into fine particles and washed away into the drainage system, thus eliminating unhygienic scrap bins and costly refuse collection.
 
Suitable to deal with food waste from small and large canteens, restaurants, schools, clubs, ships, oil rigs etc. 

The nominal capacity is up to 150kg per hour.

All Units are fitted with the same type of motor - ½h.p. high torque continuously rated reversing motor which is fan cooled with capacitor start and incorporating thermal cut-out. The units have  precision cutting head and the rubber housing is particularly efficient at absorbing vibration and
reducing noise levels. All types supplied complete with ‘S’ trap for connection to 2” waste pipe. The outlet is fully adjustable through 360° to suit  any particular installation.

EXCLUSIVE to this range is the electrical control equipment - it reduces the input voltage 240v to 12v and ensures greater safety in the possible
event of an electrical fault. A PRINTED CIRCUIT incorporates a no-volt release device.

Operation is fully automatic. Immediately the unit is switched on the solenoid valve fitted to the water supply is actuated. The flow rate consumption is approximately 12 to 16 litre/minute.

MODEL WD-50S
A small Waste Disposer for mounting under a sink bowl. A cut-out of 89mm (3½”) is required in order to mount the unit to the sink,. The unit is supplied complete with wall mounted motor control box incorporating 12 volt printer circuit.

12 months Parts & Labour Warranty

Important Note: The illustration of the freestanding unit is shown with the optional side panels avaliable at an extra cost.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Specification

WD-50S Food Waste Disposer

Weight: (kgs)

  • 17

Motor:

  • 0.5 High Torque

INSTALLATION


ELECTRICAL
Connection to be made from a fused isolator. All units supplied with 2 metres mains cable wired into the control box.

WATER SUPPLY Model WD-50S - From sink tap (not supplied)
Model WD-50H & WD-50F - 15mm cold water supply should be connected to the 1/2”BSP
connection on the solenoid valve which provides automatic water flow each time the machine is
started. Minimum water head 5 metres. For best results flow rate should be approximately
12-16 litre per minute.

WASTE 54mm plastic or copper pipe to be connected to ‘S’ trap supplied with units, laid to a minimum

CONNECTION
fall of 1 in 16. The pipework should be as simple as possible with no sharp bends.

MAINTENANCE
No routine maintenance is required other than regular cleaning and inspection.
A release key is provided to free the rotor should it become jammed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Warranty N/A
Estimated Delivery 3 to 5 Working Days
SKU MET-WD-50S
Manufacturer Metcalfe
Supplier Product Code WD-50S